ANGELS Dental Implant Solutions Center
ANGELS Dental Implant Solutions Center -- We want you smile easily
Add to Cart
Prefabricated RN 4.8mm Straumann Multi Unit Abutments
ITI Straumann Tissue Level Synocta® Titanium Multi unit Straight Abutment Compatible
RN 4.8mm
Desciption:
This staight abutment comes with a screw that takes a Straumann-Torx driver
This abutment is prep-able with a 1mm/2mm/3mm collar height. (Or according your customize request)
Material:
Ti 6AI-4V ELI (Supply from Germany)
Feature:
* Titanium interface abutment
* 1pc Screw Included
* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility
* Can production Custom interface
Approved by CE, ISO 9001, ISO 13485
| REFERENCE | MATERIAL | HEIGHT (MM) | PLATFORM |
|---|---|---|---|
| ANGELS | Titanium Grade 5 | 1 | Ø4.8 |
ITI Straumann Tissue Level Synocta® Titanium Multi unit Straight Abutment are prefabricated, screw-retained intraoral abutments intended to be connected directly to endosseous implants in partially or fully edentulous patients for the retention of cast or milled bar overdentures. For implant-supported prostheses, six or more implants are recommended in the maxilla, four or more in the mandible. If clinical conditions dictate fewer implants, an implant-retained, tissue-supported prostheses is indicated. Multi-unit abutments are precisely machined from titanium alloy, and are available with a variety of collar heights to achieve optimal emergence from shallow or deep gingival wells. Each Inclusive Multi-Unit Abutment is shipped with a delivery carrier color-coded to indicate the restorative platform of the seated implant.
Straight multi-unit abutments lack any anti-rotational features at the implant-abutment interface. The apical portion of a straight multi-unit abutment is threaded for attachment with the internal connection of a seated implant. For abutment delivery, the occlusal surface features a male hex head compatible with the Inclusive Multi-Unit Driver.
Angled multi-unit abutments of 17 degrees or 30 degrees enable clinicians to compensate for the divergence of seated implants or to otherwise accommodate an angled path of insertion. Angled multi-unit abutments feature an anti-rotational connection interface specific to the matching implant platform, and are attached to the implant fixture with an angled multi-unit abutment screw.
Both straight and angled multi-unit abutments feature a female connection port at the coronal apex, to allow for the attachment of a screw-retained or fixed-removable dental prosthesis with a multi-unit restorative screw (Inclusive Prosthetic Screw).
Each angled Inclusive Multi-Unit Abutment is packaged with a separate retaining screw (Inclusive Angled Multi-Unit Abutment Screw) compatible with the restorative instrumentation of the specified implant system. Prosthetic screws included.
The following conditions would contraindicate use of Inclusive Multi-Unit Abutments: (a) greater than 45 degrees divergence from parallel for a splinted restoration when using 30-degree angled multi-unit abutments; (b) greater than 32 degrees divergence from parallel for a splinted restoration when using 17-degree angled multi-unit abutments. Angled abutments should not be used to restore small-diameter implants (less than or equal to 3.0 mm) in the posterior region.
ITI Straumann Tissue Level Synocta® Titanium Multi unit Straight Abutment are packaged NON-STERILE. Prior to use in the oral environment, they should be cleaned, disinfected, and sterilized before use.